GB/T 2099.3 Figure 101 Single-phase Two-pole Additional Torque Plug Gauge

GB/T 2099.3-2022 Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors

Figure 102 Gauge for single-phase two-pole with earthing additional torque plug

Figure 101 Gauge for single-phase two-pole additional torque plug

14.23 Replace with:

Adaptors shall not impose excessive stress on fixed socket-outlets.

Compliance is checked by the following test:

Insert the adaptor into a fixed socket-outlet complying with GB/T 2099.1, GB/T 1002, or GB/T 1003.

Each socket-outlet part shall first be engaged with the corresponding additional torque gauge (see Figure 101, Figure 102).

Rotate the socket-outlet about a horizontal axis passing through the axis of the live contact tubes and located 8 mm (for socket-outlets of Figure 2 in GB/T 1002-2021) or 10 mm (for socket-outlets of Figure 4 in GB/T 1002-2021) behind the engagement face, parallel to this engagement face. The additional torque required to maintain the engagement face in the vertical plane shall not exceed 0.25 N·m.